Step 8 Connect Battery Pack (Optional) - LSI MegaRAID Enterprise 1600 Hardware Manual

Step 8 Connect Battery Pack (Optional)

There are two ways to install a battery pack onto the Series 471 MegaRAID Enterprise 1600 160M
RAID controller. The first way is to use a DIMM with a battery backup attached to it.
The battery pack is shown in the bottom view of the DIMM socket below. Pin 1 on the cable from
the battery pack is usually denoted by a red wire. The caution information appears on the battery
module as shown below.
J23Battery Connector Pinout
62 MegaRAID Enterprise 1600 Hardware Guide
Pin Description
1 VBAT1+ (red wire)
2 TSENSE (white wire)
3 VBAT- (black wire)
4 BATDQ
5 Ground
Cont'd