Step 4 Install Cache Memory
A minimum of 16 MB of cache memory is required. The cache memory
Memory Specifications Insert one in the cache memory socket.
DIMM Specifications Install cache memory DIMMs on the MegaRAID controller card in the cache memory socket.
Use a 64-bit 3.3V single-sided or double-sided 168-pin unbuffered DIMM. Lay the controller card
component-side up on a clean static-free surface. The memory socket is mounted flush with the
MegaRAID card, so the DIMM is parallel to the MegaRAID card when properly installed. The
DIMM clicks into place, indicating proper seating in the socket. The MegaRAID card is shown
lying on a flat surface below.
Important
must be installed before MegaRAID is operational.
Chapter 6 Hardware Installation
Cont'd
51