Table of Contents
Advertisement
Configuration of
NVRAM and drives
mismatch for Host
Adapter.
Run View/Add
Configuration option of
Configuration Utility.
Press any key to run the
Configuration Utility.
1 Logical Drive Failed
X Logical Drives
Degraded
1 Logical Drive Degraded
Insufficient memory to
run BIOS. Press any key
to continue...
Insufficient Memory
110
MegaRAID Enterprise 1600 Hardware Guide
Message
Problem
The configuration stored
in the MegaRAID adapter
does not match the
configuration stored in the
drives.
A logical drive failed to
sign on.
x number of logical drives
signed on in a degraded
state.
A logical drive signed on
in a degraded state.
Not enough MegaRAID
memory to run
MegaRAID BIOS.
Not enough memory on
the MegaRAID adapter to
support the current
configuration.
Suggested Solution
Press a key to run
MegaRAID Manager.
Choose View/Add
Configuration from the
Configure menu.
Use View/Add
Configuration to examine
both the configuration in
NVRAM and the
configuration stored on
the disk drives. Resolve
the problem by selecting
one of the configurations.
Make sure all physical
drives are properly
connected and are
powered on.
Run MegaRAID Manager
to find out if any physical
drives are not responding.
Reconnect, replace, or
rebuild any drive that is
not responding.
Make sure all physical
drives are properly
connected and are
powered on.
Run MegaRAID Manager
to find out if any physical
drives are not responding.
Reconnect, replace, or
rebuild any drive that is
not responding.
Make sure all physical
drives are properly
connected and are
powered on.
Run MegaRAID Manager
to find out if any physical
drives are not responding.
Reconnect, replace, or
rebuild any drive that is
not responding.
Make sure MegaRAID
memory has been properly
installed.
Make sure MegaRAID
memory has been properly
installed.
Advertisement
Table of Contents
