Table of Contents
Advertisement
SCSI Termination,
Continued
Connecting Non-Disk SCSI Devices SCSI Tape drives, scanners, CD-ROM drives, and other non-disk drive
devices must each have a unique SCSI ID regardless of the SCSI channel they are attached to. The
general rule for Unix systems is:
•
tape drive set to SCSI ID 2
•
CD-ROM drive set to SCSI ID 5
•
all non-disk SCSI devices attached to SCSI channel A
Make sure that no hard disk drives are attached to the same SCSI channel as the non-disk SCSI
devices. Drive performance will be significantly degraded if SCSI hard disk drives are attached to
this channel.
60
MegaRAID Enterprise 1600 Hardware Guide
Advertisement
Table of Contents
