Panel Explanation - Ablerex MSII-RT User Manual

17
18
19
20
21
UPS under Redundancy Mode
22
23
24 UPS Fault or Abnormal Warning LED
25 EPO
26 Er05
27 Er06
28 Er10
29 Er11
30 Er12
31 Er15 Wrong Procedure to Enter Maintenance Mode
32 Er24 CVCF mode with Bypass input
33 Er**
*The specified modes include Normal mode, ECO mode, CVCF mode, etc..
Next Page
Special Function Log in /out
Enter or Reconfirmed
Utility Input Normal LED
Bypass Input Normal LED
UPS under ECO Mode
Emergency Power Off
Battery Weak or Dead
Output Short Circuit
Inverter Over-current
UPS Overheat
UPS Output Overloading
Other Error code
8
2.3.

Panel explanation

2.3.1. Front Panel Function Explanations
LCD Display
Green LED steadily lights up to indicate that the Utility input voltage is within
the window; the LED flashes flickeringly to indicate that the Utility input
voltage is within the acceptable window.
Green LED lights up to indicate Bypass Input is normal.
Green LED lights up to indicate the UPS has the capability to run under
redundancy mode.
UPS is working under ECO (Economic, Line-interactive) mode.
UPS Fault or Abnormal
UPS ON/Alarm Silence
UPS OFF Switch
Special functions log in/out
9