Ablerex MSII-RT User Manual page 16

3.5.3 Check Measured Values & Figures detected by UPS
3.5.3.1 If you would like to check the measured values & figures detected by the
UPS, please use scroll up and scroll down
scroll down key pad, the LCD display will illustrate as Drawing C(Voltage from
Utility Input) Drawing I1(Voltage from Bypass Input)
from Utility Input) Drawing K(Frequency from Bypass Input)
Output Voltage) Drawing M(UPS Output Frequency)
Load %) Drawing O(UPS Battery
Temperature).
I1
* It shows voltage comes from Bypass Input
J
* It shows frequency from Utility Input.
K
* It shows frequency from Bypass Input.
key pads. When you use
Drawing J(Frequency
Drawing L(UPS
Drawing N(UPS Output
Voltage) Drawing P(UPS
30
L
Inner
M
N
O
P
* It shows UPS output Voltage.
* It shows UPS output frequency.
* It shows UPS output load level(%)
* It shows Battery Voltage.
* It shows UPS Inner Temperature
31