3.3 Live Display Mode
3.3.1 Full HD(1080p) Live Display
Full HD Live Display can be supported in live mode by using the NVR's HD output.
N
OTE
In playback mode, the maximum resolution is 1920x1080 on the first stream and 640x360 on the second
stream.
3.3.2 Display
Channel selection can be done by following one of the steps below:
1.
CH1~CH16 buttons in the IR Remote Control.
2.
1~16 virtual buttons at the bottom of the GUI display.
The live images can be displayed in 1, 4, 9, 16 screen splits.
To select a channel to view in single channel mode, click on the channel using the USB mouse. To return to the previous
display mode, click anywhere on the screen again.
To view the pop-up menu, right-click anywhere on the display screen
N
OTE
To select a channel using the mouse, perform a slow and clear click of the left mouse button.
<Full HD Live & Playback Display>
[1 Ch]
User's Manual | 14
[4 Ch]