Live Display Mode - Digital Watchdog VMAX HD User Manual

13 | Chapter 1 : DVR User Manual
Operation
2.

2.1 Live Display Mode

2.1.1 Channel Selection
The images can be seen on real-time by in single channel or 4-channel mode as seen below. To
switch from a single-channel view to a multi-channel view and vice versa, choose one of the
following options:
[1 Channel]
1. Using your Remote Control (See section 1.6 IR Remote Control for more information):
a. Press the channel number you wish to view in single-channel mode.
b. Press the "Select" button to return to multi-channel mode.
c. If "Select" is pressed while in multi-channel mode, the DVR will display the last
channel seen in single mode.
2. Using the USB Mouse:
a. Move the mouse's cursor over to the channel you wish to view in single mode.
b. Double-click on the screen. The channel selected will be displayed in single-channel
mode. You can also right-click to open the pop-up menu (see section 2.1.5 Pop-up
Menu) and select Display 1Screen.
c. To change from single to multi-channel mode, right-click on the screen and select
Display 4Screens.
3. Using the DVR's Front Panel (See section 1.4 Front Panel for more information):
a. Press the channel number you wish to view in single-channel mode from the four
buttons at the top of the DVR's front panel.
b. Press the "Enter" button to return to multi-channel mode.
c. If "Enter" is pressed while in multi-channel mode, the DVR will display the last
channel seen in single mode.
Administrator user can set different level of authorization for each user. If a certain user is not
allowed to view a certain playback channel, then no image will appear on the display screen.
Refer to 3.1.2 User for more information.
[4 Channel]