Screen Saver; Setting - Digital Watchdog VMAX IP 4CH User Manual

25 | VMAX IP™ Complete IP System Bundle
When user click on such overlapped period, a message titled "Recorded video Selection" will pop up. The user can then
select whether to play DST data or Non-DST data.
Click OK to play DST image.
["DST" image is displayed on screen]

3.8 Screen Saver

The Screen Saver features protects the screen and data of the NVR by turning off after a set time of inactivity. To enable the
Screen Saver, right-click anywhere on the screen and go to the menu setup: SYSTEM > SYSTEM INFO and click "SCREEN
SAVER". Set the WAITING TIME for when the monitor will automatically turn off.
N
OTE WAITING TIME: Users can select the WAITING TIME from NONE, 1,2,3,4,5,6,7,8,9,10,20,30,40,50, and
up to 60 MIN. The SCREEN SAVER will not work when WAITING TIME is set to "NONE". SCREEN
SAVER may not work, during system upgrade, HDD format, or data backup process. The system
continues to record while the monitor is turned off.
4 S
ETTING
General setting structure consists of "Quick Setup", "System", "Device", "Record", "Alarm," and 'Network" as shown below.
To open System Log Search, select one of the following options:
1. Click the button in the quick menu bar and select Setup Menu.
2. Right-click anywhere on the screen and select Setup Menu.
To view the sub-menu categories for each menu option, hover the mouse over the menu option. To enter the setup menu,
click on the desired category.
Click CANCEL to play Non-DST image.
["Non-DST" image is displayed on screen]