Record Setup - Digital Watchdog VMAX IP 4CH User Manual

Users can configure various record settings such as Continuous, Motion, and Sensor for each individual camera channel in
the Record Setup Menu. Network Stream settings relies on network camera for recording. Approved network camera setting
will be set by NVR menu and user can set up streaming video quality, FPS, bitrates in network camera menu as well.
`
4.3.1 Schedule
Setup a recording schedule by applying a multiple recording modes to each camera according to date and time.
1. Select a channel you want to setup be pressing the channel number. You can also select the 'All' button to apply the
recording schedule to all the channels.
2. Select a recording mode from the available options by checking the box next to it.
3. Click on the corresponding date and time boxes to enable recording. You can also click-and-drag to select multiple time
boxes. Selected boxes will appear with the color associated with the selected recording mode.
Repeat steps 2-3 as needed to add multiple recording modes to different parts of the schedule. Press 'Save' to save all
changes.

4.3.2 Record Setup

Use the Record Setup menu to configure the first and second stream for each of the cameras.
1. Select the channel to setup from the drop-down menu.
2. Setup the channels main and secondary stream settings, including resolution, quality, FPS, and pre and post alarm
recording.
a. Resolution: select from 1920x1080, 1280x720, or 640x360. Secondary stream is set by default to 640x360.
b. Codec: the codec is set by default to H.264 on the main stream, and MJPEG on the secondary stream.
User's Manual | 38