Network - Digital Watchdog VMAX IP 4CH User Manual

4.5 Network

4.5.1 Network
The system has built-in web server.

Internet Protocol Version- Not selectable. TCP / IP v4 support only.

Network Type- Select network connect type. Select either Static IP or DHCP for dynamic IP.
N
OTE For proper network setup and configuration of the NVR, please contact your Network Administrator for
more information.
If DHCP is selected, the NVR will automatically configure the network settings according to the current network
requirements. If DHCP is selected, click 'IP DETECT' button to detect automatically all the network settings.
If Static IP is selected, manually enter all necessary network settings. For proper configuration, it is recommended to
assign the NVR a DHCP address and let it auto discover all the proper network settings, and then change the Network
Type back to Static IP and save the changes.

IP Address- displays the NVR's IP address. If DHCP is selected, the IP address will automatically adjust to match the
network's requirements. You can also manually change the IP address as needed.

Subnet Mask- Subnet Mask address classifies the system's subnet. Standard address is 255.255.255.0.

Gateway- This is the IP address of the router or gateway server. It is required when connecting to the NVR through the
external router over the internet (from another network). For more information, consult your network administrator or
your internet provider.
VMAX IP 4CH Model
User's Manual | 44
VMAX IP 8/16CH model