Password Setting; Ide Hdd Auto Detection - Advantech PCA-6166 User Manual

3.11 Password Setting

To change the password:
1. Choose the "PASSWORD SETTING" option from the Setup
main menu and press <Enter>.
The screen will display the following message:
Enter Password
Press <Enter>.
2. If the CMOS is good or if this option has been used to change the
default password, the user is asked for the password stored in the
CMOS. The screen will display the following message:
Confirm Password:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS.
The password must be no longer than eight (8) characters.
Remember, to enable the password setting feature, you must first
select either Setup or System to secure your option in "BIOS FEA-
TURES SETUP".

3.12 IDE HDD Auto Detection

"IDE HDD AUTO DETECTION" automatically self-detects for the
correct hard disk type.
Enter Password:
Confirm Password:
Chapter 3 Award BIOS Setup
49