Load Setup Defaults; Password Setting - Advantech PCA-6277V-00A1 Manual

3.11 Load Setup Defaults

"LOAD SETUP DEFAULTS" loads the values required by the system
for maximum performance.

3.12 Password Setting

To change the password:
1. Choose the "Set Password" option from the "Initial Setup Screen"
menu and press <Enter>.
The screen will display the following message:
Enter Password:
Press <Enter>.
2. If the CMOS is good or if this option has been used to change the
default password, the user is asked for the password stored in the
CMOS. The screen will display the following message:
Confirm Password:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS.
The password must be no longer than eight (8) characters.
Remember, to enable the password setting feature, you must first
select either "Setup" or "System" from the "Advanced BIOS Fea-
tures" menu.
Chapter 3 Award BIOS Setup 61