Adjust Mode; Settings In The Adjust Mode; Adjust Mode Setting Procedure - Konica Minolta 7115 Service Manual

5.

ADJUST MODE

• Used at the factory for making adjustments.
5-1.

Settings in the Adjust Mode

Code No.
--1 Printer CD Registration adjustment
--2 Printer FD Registration adjustment
--3 Scanner CD Zoom adjustment
--4 Scanner FD Zoom adjustment
--5 Scanner CD Registration adjustment
--6 Scanner FD Registration adjustment
--7 ADF FD Zoom adjustment
--8 ADF CD Registration adjustment
--9 ADF FD Registration adjustment
-10 ATDC Sensor Gain Manual adjustment
-11
-12 Test Print
This test is for factory adjustment only and should
-20
NOT be used.
5-2.

Adjust Mode Setting Procedure

<Procedure>
1. Set the machine into the Tech. Rep. Mode.
2. Press the following keys in this order:
STOP START.
3. Enter the code number corresponding to the subfunction to be used.
Code No.: 1 to 12 and 20
4. Press the START to display the current setting value.
5. Press the CLEAR to clear the current setting value.
6. Enter the new setting value from the KEYPAD.
If any value outside the available setting range is entered, the Display shows "Err"
rejecting the entry. (The old setting value will reappear on the Display 1 sec. later.)
7. Press the START to validate the new setting value just entered.
<Exiting the Mode>
• Press the AUTO RESET until the initial screen reappears.
Description
S-27