Administrator No. Input (Display: - - 7; Change Fixed Zoom (Display: - - 8; Marketing Area Setting (Display: - - 9 - Konica Minolta 7115 Service Manual

(8)

Administrator No. Input (Display: - - 7)

• Set an ID number for opening the "Administrator Mode" screen of Utility Mode from the
KEYPAD.
<Procedure>
1. Press the START to alternately display the current administrator number.
2. Press the CLEAR to clear the current administrator number.
3. Enter the new administrator number from the KEYPAD. The number should consist of 6
digits, ranging from 000000 to 999999.
4. Press the START to validate the new administrator number just entered.
(9)

Change Fixed Zoom (Display: - - 8)

• Change a fixed zoom ratio to a desired value.
The ratios of 50 %, 100 %, and 200 % cannot be changed.
<Procedure>
1. Press the START to display the fixed zoom ratio.
2. Press the RE to select the specific zoom ratio to be changed.
3. Press the CLEAR to clear the zoom ratio selected.
4. Enter the new zoom ratio from the KEYPAD.
5. Press the START to validate the new zoom ratio just entered.
If any value outside the allowable setting range is entered, the Display shows "Err"
rejecting the entry. (The old zoom ratio will reappear on the Display 1 sec. later.)

(10) Marketing Area Setting (Display: - - 9)

• Set the marketing area.
<Procedure>
1. Press the START to display the current marketing area setting.
Setting Description
0 JAPAN
1
2 EUROPE
3 China
4 Other areas
2. Press the CLEAR to clear the current marketing area setting value.
3. Enter the new setting value from the KEYPAD.
4. Press the START to validate the setting value just entered.
If any value outside the available setting range is entered, the Display shows "Err"
rejecting the entry. (The old setting value will reappear on the Display 1 sec. later.)
USA
S-22