Operation; Overview; Connections And Control Devices - ESAB Warrior 500i CC/CV Instruction Manual

6 OPERATION

6 OPERATION
6.1

Overview

General safety regulations for handling the equipment can be found in the chapter
"Safety". Read it before you start the equipment.
6.2

Connections and control devices

1. Mains power supply switch, O/I
2. Indicator lamp, yellow, overheating
3. Indicator lamp, green, VRD function
(reduced open-circuit voltage)
4. Display, current (A) and voltage (V)
5. Knob for setting: SMAW/GTAW: Current
(A)
6. Knob for selecting electrode type
7. Knob for inductance (MIG/MAG) and arc
force (MMA):
8. Knob for welding method
0463 341 131
9. Connection (-): MIG/MAG: Return cable
TiG: Welding torch MMA: Return cable or
welding cable
10. Connection (+): MIG/MAG: Welding cable
TIG: Return cable MMA: Welding cable or
return cable
11. Circuit breaker, 10 A, 42 V
12. Connection for wire feed unit
13. Connection for remote control unit (option)
14. Connection for mains power supply
15. Lifting eye bolt
- 14 - © ESAB AB 2013