Exhaust Hose Installation - Kenmore 405.84086 Use & Care Manual

Exhausthose installation
The exhausthose and adaptor must be
installed or not installed in accordance
with the usage mode.
COOL or AUTO mode Install
adaptor
Fig.16a
FAN or DEHUMIDIFY mode Do not install
1. Screw adaptor B and adaptor I onto
the exhaust hose as shown inFig. 16a.
2. Align tabs of B adaptor with slotsof
air outlet and push down to secure in
place (see Fig. 17).
NOTE: The exhaust hose can be compressed or
extended as needed, but optimum performance
decreases at greater lengths.
IMPORTANT:
DO NOT BEND THE EXHAUST HOSE TOO
SHARPLY (See Fig. 18a)
CONNECT THE HOSE SMOOTHLY
(See Fig.18b)
Caution:
For the unit to exhaust properly, make sure
that there is no obstaclewithin 20 inches of
the window slider opening.
Air Outlet
Adaptor B
Fig.17
11/"
_-/1"
////
///,,
2"/4
///I
Fig.18a
///"
////
f///
_,-//,
111"
rrr_
///"
r///
///"
///"
////
N
Fig.18b
11