Location Of The Portable Air Conditioner; Exhaust Hose Connection; Indow Kit Installation - Kenmore 407.83086 Use & Care Manual

LOCATION OF THE PORTABLE AIR CONDITIONER (Fig. 4)
I
12" (30 cm)
i!,
i
12" (30 cm)
1. Select a location near a window and electrical outlet.
2. Position the unit in a fiat, spacious location with a minimum of one foot (30 cm)
between the air outlets and any walls or furniture.
3. Do not operate the unit in extremely moist areas such as a sauna.
WINDOW KIT INSTALLATION
The Window Kit (included) contains three sliding pieces, and can be adjust to fit
most standard vertical and horizontal windows (see Fig. 5 & Fig. 6).
Horizontal Window
Vertical
Window
For very wide windows, use all three pieces. The maximum width is 58". For narrow
windows, you may have to cut down the end of the piece with the hose attachment
hole. The minimum width is 10". Cut the window kit using a strong pair of scissors or
heavy duty cutting pliers.
Do not cut into the exhaust hole.
EXHAUST HOSE CONNECTION
The exhaust hose must be attached for cooling and dehu-
midification. When installing the exhaust hose, try and
keep it as fiat as possible. The less angles and bends in
the hose, the better the unit will perform. If bending or an
angle is necessary, use single 90 ° angles (Fig. 7). Multiple
bends will decrease performance and efficiency. Make
sure there are no low spots to prevent moisture collection.
Attach window kit adapter to window kit by placing
adapter into exhaust hole. Push forward until it is secured.
22" Maximum
}0