Installation In A Sliding Sash Window - Kenmore 405.84086 Use & Care Manual

Installation in a slidingsashwindow
2.
Cut a length of adhesive foam seal the
height of the window and attach it to
the window frame (see Fig. 12).
Place the window slider onto the adhesive
foam seal (see Fig. 13). Adjust window slider
height according to the instructions on page 8.
3.
4.
Cut another length of adhesive foam seal and
attach it to the window sash (see Fig. 13).
Close the window sash securely onto the
window slider (see Fig. 14).
"Window Silder"
Cut the non-adhesive thick foam seal to
window height and insert into the open
gap between the inner window and outer
window sash (see Fig. 15).
Fig.13
Fig.14
Fig.lS
10