How To Use The Buttons; Cooling/Fan Operation; Dehumidifying Operation - Kenmore 405.84086 Use & Care Manual

HOW TO USE THE BUTTONS
AUTO OPERATION
Ensure the unit is plugged in and power is available. The OPERATION
indicator on the display panel of the main unit will be illuminated.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired temperature. The
temperature can be set within a range of 62°F - 88°F (17°C - 30°C)
in 2°F (1°C) increments.
3. Press the ON/OFF button to start the Air Conditioner.
NOTE
1. in Auto mode, the Air Conditioner will logically choose a mode of
Cooling, Fan, or Dry, by sensing the difference between the actual
ambient room temperature and the setting temperature on the
remote controller.
2. in Auto mode, you cannot switch the fan speed, it will be
automatically controlled.
3. if the Auto mode is not comfortable for you, the desired mode can
be selected manually.
COOLING/FAN OPERATION
Ensure the unit is plugged in and power is available.
I. Press the MODE button to select COOL or FAN mode.
2. Press the UP/DOWN buttons to set the desired temperature (in COOL mode only). The
temperature can be set within a range of 62°F - 88°F (17°C - 30°C) in 2°F (I°C) increments.
3. Press the FAN button to select the fan speed in four steps- Auto, Low, Med, or High.
4. Press the ON/OFF button to start the Air Conditioner.
NOTE
in the FAN mode, the temperature setting is not displayed in the remote controller and you
are not able to control the room temperature, in this case, only step I, 3 and 4 may be
performed.
DEHUMIDIFYING OPERATION
Ensure the unit Js plugged in and power is available. The OPERATION indicator on the
display panel of the indoor unit will be illuminated.
1. Press the MODE button to select DRY mode.
2. Press the ON/OFF button to start the Air Conditioner Jn Dry mode.
NOTE
in the Dehumidifying mode, you cannot switch the fan speed, it will be automatically
controlled.
21