Installation In A Double-Hung Sash Window - Kenmore 405.84086 Use & Care Manual

Installationin a double-hung sashwindow
1. Cut a length of adhesive foam seal the
width of the window and attach it to the
window stool (see Fig. 8).
2. Place the window slider onto the adhesive
foam seal (see Fig. 9). Adjust window
slider width according to the instructions
on page 8.
3. Cut another length of adhesive foam seal
and attach it to the bottom of the window
sash. Close the window sash securely onto
the window slider (see Fig. 10).
4,
Cut the non-adhesive thick foam seal to
window width and insert into the open
gap between the inner window and outer
window sash (see Fig.11).
iiie Fo S
Fig.8
Window stool
Fig.9
"Window stool"
Fig.lO
"Non-adheslve Thick Foam Seal"
Fig.ll