Kenmore 405.84086 Use & Care Manual page 19

if this button i spressed formore t han 2 seconds, thesystem w illautomatically store t he
current operation settings including operating mode, setting temperature, fanspeed l evel
andsleep f eature ( ifactivated). Then t henext t ime the button i spressed, theremote will
transmit these s tored s etting totheunit.
11 FAN SPEED Button
Used t oselect the fanspeed
i n four steps:
rAUTO _ LOW _,_ HIGH q
12 TIMER ON Button
Press this button to initiate the Auto-on time sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When the setting time displays ]OH, each press
will increase the auto-timed setting in 60 minutes increments. To cancel the auto-timed
program, simply adjust the Auto-on time all the way back to 0.0.
13 TIMER CANCEL Button
Press this button to cancel the auto-timed program. NOTE: If the unit is running in timer
mode, when you press this button, the function will be cancelled, and the unit will turn off:.
14 TIMER OFF Button
Press this button to initiate the auto-off time sequence. Each press will increase the auto-
timed setting in 30 minutes increments. When the setting time displays 10H, each press
will increase the auto-timed setting in 60 minutes increments. To cancel the auto-timed
program, simply adjust the auto-off time to 0.0
15 LOCI( Button
When you press the recessed LOCi( button, all current settings are locked in and the
remote controller does not accept any operation except that of the LOCK button. Press
again to cancel the LOCK mode.
19