Table of Contents
Advertisement
Framing dimensions
H
The main points governing location are flueing and warm air distribution. The Rinnai Evolve has an
integrated zero clearance box that isolates the appliance from combustible materials. This means it can
be installed directly into a decorative fireplace constructed from materials such as wood or plaster.
The heater must be positioned within the enclosure on a flat level surface that allows free movement of
the appliance. The joists used to support the appliance off the ground must be capable of supporting a
minimum of 1.5 times the weight of the appliance. Wheels located at the rear of the heater allows the
unit to slide in and out of the enclosure for installation and maintenance.
Please note
Depending on the type of flue being installed additional nogs may be required so the wall straps in each
flue kit can be securely attached. The additional bracing of the frame is normally completed by the
gasfitter.
W
D
Enclosure dimensions
950
W-width 965-980 mm 1265-1280 mm
H-height 570-580 mm 570-580 mm
D-depth
570 mm min. 570 mm min.
Evolve Installation Guide: 12471-C 03-15 | 9
1250
Advertisement
Table of Contents
