Redialing The Number - RADVision SCOPIA XT1000 User Manual

Procedure
Step 1
In the Main Menu page, select Make your call. You can also press either
the XT1000 Remote Control Unit
Step 2
The Direct call page appears. Enter the contact number using the XT1000 Remote Control Unit or
the virtual keyboard. You may also insert the name of the contact you wish to call, if it exists in
your phonebook.
Note:
Step 3
Select Basic options. Use the arrow keys to select the contact's call protocol.
Step 4
(Optional) To change the contact's communication settings, select Advanced options. Under Rate
(K) select the maximum bandwidth to use for this call. By default, the system will use the
maximum available bandwidth. In the Call type dropdown menu, select the type of call:
Audio-Video or Audio.
Step 5
To call, press

Redialing the Number

Procedure
Step 1
In the Main Menu page, scroll to Make your call.
Step 2
Press
of the last dialed, received, and missed calls. Icons appear next to a contact number or name.
Icon
Note:
Step 3
Select the relevant call using the arrow keys.
Step 4
Press
RADVISION | User Guide for SCOPIA XT1000 Version 2.0
For information on how to open the virtual keyboard, see
Characters page 7.
or .
Recall on the XT1000 Remote Control Unit. The Recall list will appear, showing the list
The system allows you to store up to 25 recent calls.
or Call to place the call.
Indicates
Received call
Dialed call
Missed call
or Direct call on
Entering Alphanumeric
'Making Calls' | 10