Advertisement
Starting or Joining a Conference Using an Auto Attendant Number
You can start or join a conference using an auto attendant number with both H.323 and SIP
endpoints.
Procedure
Step 1
Contact an administrator and verify the auto attendant number. By default, the auto attendant
number is set to 1800.
Step 2
From the endpoint, dial the auto attendant number, then perform one of these actions:
•
•
Starting or Joining a Conference with H.323 Endpoints by Dialing Directly into the SCOPIA
Elite MCU
Perform this procedure to start or join an ad hoc conference with H.323 endpoints.
Procedure
Step 1
Contact an administrator and verify the meeting ID number.
The meeting ID number is composed of a service prefix number and a unique number (or numbers)
identifying the meeting.
For example, the meeting ID number of 711234 consists of these elements:
•
•
RADVISION | User Guide for SCOPIA Elite 5000 Series MCU Version 7.5
Select 0 to create a new meeting.
-or-
Select a meeting to join from the list of existing meetings.
71 is the service prefix.
1234 is the unique meeting number.
Figure 2-1
MCU Menu
Starting or Joining a Conference from an Endpoint | 4
Advertisement
