Camera App - EUROCOM m248 User Manual

Modules & Options
Figure 7 - 2
Camera App Bar
7
Figure 7 - 3
Camera Options
7 - 4 PC Camera Module

Camera App

1. Make sure the camera is powered on (use the Fn + F10 key combination to toggle
power to the camera module).
2. Click the Camera app icon in the Start screen to run the Camera app
3. The camera interface is a translucent app bar with three buttons.
• Camera options:. Click this button to open a window with three main options:

Camera Options
• Resolution (determined by the
camera spec)
• Audio device (select micro-
phone to use)
• Video Stabilization (a toggle
based on spec of the camera)
.