3- Required Items For Installation; 4- Package Contents - Wirepath Surveillance WPS-500-PTZ-IP Installation And User Manual

WPS-500-PTZ-IP Installation Manual

3- Required Items for Installation

The following items are required during the installation of a Wirepath™ IP Camera. It is recommended that these items are prepared
in advance to ensure that the installation can be performed smoothly.

All Cameras to be installed in the system

Network Connection near the location of the Camera

Administrator rights to the computer that will be used to configure the Camera(s)
Router / Switch Details – Contact the network admin to obtain
o
Admin Rights – Required to setup the network and port forwarding for remote access.
o
o
Static IP to assign to the Camera
o
Default gateway
o
Subnet Mask
o
DNS Address

Installation Manual for all the Wirepath™ Surveillance IP Cameras being installed

CD-ROM supplied with the Camera

4- Package Contents

(1) WPS-500-PTZ-IP
(1) 12V DC 3A Power Supply
(4) Screws
(4) Wall Fasteners
(1) Quick Start Guide
(1) CD-ROM containing documents and setup software
NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA. The PS-12DC-1A, WPS-PS multiple output power supply or
a Power over Ethernet (PoE) switch is recommended.
Pg. 8
© 2013 Wirepath™ Surveillance