Download Print this page

Wirepath Surveillance WPS-300-DOM-A-WH Installation Manual

Dome camera

Advertisement

Quick Links

SAFETY INSTRUCTIONS

This information is provided to ensure your safety and to
prevent physical or financial loss. Please read this document
carefully before installing and operating the camera.
1. Handle with care.
This camera is not designed to resist heavy impact. Use
caution when handling to avoid damage to sensitive internal
components.
2. Do not install the camera under extreme temperatures.
This camera only operates under temperature conditions
between 14˚F ~ 140˚F.
3. Do not mount the camera directly facing bright light
sources.
Exposing the camera to strong light over long periods of time
will damage the camera's sensor.
4. Do not supply voltage other than 12VDC.
This camera regulates power within this range. Higher
voltages will damage the camera's electronic components.
5. Do not install the camera in environments with extreme
humidity.
Installing camera in environments with extreme humidity may
cause moisture to condense on the surface of the lens or
dome cover, which can affect picture quality.
FEATURES
• 1/3" Sony Super HAD II CCD
The Sony Super Had II CCD is ideal for low lux illumination
resulting in a clear and crisp image.
•Varifocal Lens
This camera features a varifocal lens with a focal length of
4-9mm to offer flexibility during installation.
• Built-In Infrared with Smart IR
IR LEDs provide the ability to capture images during night
and low light conditions. Smart IR prevents IR over-exposure
when an object is close to the camera
• Backlight Compensation
Backlight compensation will adjust the exposure of a
subject standing in front of a bright light source.
• 3-Axis Gimbal
A 3-axis gimbal design provides for a wide range of camera
positioning angles through mechanical adjustment for both
wall and ceiling mount applications.
© 2012 Wirepath Surveillance
WPS-300-DOM-A-WH
WPS-300-DOM-A-BL
DOME
CAMERA
WPS-300-DOM-A Installation Manual
INSTALLATION MANUAL
Review manual thoroughly
before installation.
Retain for future reference.

PACKAGE CONTENTS

(1) Camera
(1) DC Plug
(3) Screws
(3) Wall fasteners
Manual
NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA.
The PS-12DC-1A is recommended.

SPECIFICATIONS

WPS-300-DOM-A Wirepath
Dome Camera (550 TVL)
Image Sensor
Number of Pixels
Lens
Shutter Control
Auto Electronic Shutter
Auto Gain Control
Back Light Compensation ON
Auto White Balance
Sync. Mode
Scanning System
Resolution
S/N Ratio
Gamma
Minimum illumination
IR Range
Smart IR
Horizontal Sync.
Frequency
Video Output
Power Source
Power Consumption
Operating Temperature
Certifications
Dimensions
Net Weight
Surveillance IR Indoor Varifocal
1/3" Color Sony Super HAD II
NTSC:768(H)x494(V) PAL:752(H)
x582(V)
4~9mm Fixed Iris Vari-Focal Lens,
Horizonal FOV 60˚(W)~30˚(T)
<NTSC>1/60~1/100,000 sec;
<PAL>1/50~1/100,000 sec
ON
ON
ON
Internal Sync
2:1 Interlace
550 TV Lines
>48dB
0.45
0.01 Lux color, 0 Lux IR on
50ft
Yes
NTSC: 15.734KHz; PAL: 15.625KHz
1.0Vp-p,75ohm
12 VDC (500 mA) – Not included
3.6W - 300mA
14F-140F
CE, FCC, ROHS
3.07(H) x 4.65" (W)
.57 lb
*Specifications are subject to change without notice
1

Advertisement

loading

Summary of Contents for Wirepath Surveillance WPS-300-DOM-A-WH

  • Page 1: Package Contents

    A 3-axis gimbal design provides for a wide range of camera Certifications CE, FCC, ROHS positioning angles through mechanical adjustment for both Dimensions 3.07(H) x 4.65" (W) wall and ceiling mount applications. Net Weight .57 lb *Specifications are subject to change without notice © 2012 Wirepath Surveillance...
  • Page 2: Troubleshooting

    Wirepath™ direction and the focus area Surveillance or a designated service center with prior notification before replacing dome is locked and an assigned return authorization number (RA). the dome to the base. 120111 © 2012 Wirepath Surveillance...

This manual is also suitable for:

Wps-300-dom-a-bl