Wirepath Surveillance WPS-500-PTZ-IP Installation And User Manual page 39

www.snapav.com Support: 866.838.5052
Day & Night Adjusts the level of sensitivity for Day & Night Mode options.
Level
Day & Night Adjusts the amount of delay the Day & Night Mode will react between changes in the
Delay lighting conditions of the image.
Selects DNR (Digital Noise Removal) level.
3D DNR

DNR can reduce some digital noise that occurs in dimly lit scenes. Default is 1
(low).

Recommend using the lowest setting that provides adequate image quality.
Wide Dynamic Range (WDR) sets the difference between dark and light areas to maintain
WDR
a higher quality image across all lighting conditions. We recommend that this feature is
set to the default of OFF unless required for scenes containing very bright and dark areas
at the same time (such as heavily backlit windows).
Changes the orientation of the image based on the mounting method. Default is
Video
configured for standard mounting from a ceiling or eave. Select Flip or, Mirror or Rotate to
Orientation
change the orientation of the image.
R-Gain
Adjust the gain of Red in the image. Higher numbers increase the level of Red; lower
numbers decrease the level of Red.
Adjust the gain of Blue in the image. Higher numbers increase the level of Blue, lower
B-Gain
numbers decrease the level of Blue
Sharpness
Adjusts the sharpness level of the image. Higher numbers increase sharpness which
adds definition to the objects making the edges jagged and more defined. Lower
numbers remove definition from the objects making the edges smoother and less
defined.
Zoom Bar Turns the PTZ Zoom Bar over the image On or Off.
WPS-500-PTZ-IP Installation Manual
Pg. 39