Audio Settings - Wirepath Surveillance WPS-500-PTZ-IP Installation And User Manual

WPS-500-PTZ-IP Installation Manual

12.10- Audio Settings

Pg. 42
Use this menu to configure Audio if the Camera has a microphone installed.
IP Camera to
When enabled, allows audio from a microphone (ex: WPS-ACC-MIC) installed at the
PC Camera to be heard at the PC.
Audio Type
Select the type of audio to use when streaming.
Available Formats



Higher Kbps settings can increase audio quality but may cause audio to skip or cut-out
on some networks. Recommend using the lowest Kbps setting that provides adequate
audio quality.
Mic-In Volume level adjustment for the Microphone input to the camera.
Acts as an input trim level adjustment. Recommend using the highest setting that does
not cause distortion from the microphone.
Line-Out
Volume level adjustment for Line output from the camera.
Acts as an output gain adjustment. Recommend using the lowest setting that will
adequately drive an amplifier input without distortion.
G.711 (64Kbps)
G.726 (24Kbps)
G.726 (32Kbps)
© 2013 Wirepath™ Surveillance