4- Install the microSD Card (optional)
5- Mount the Camera to the Mounting Plate
Tip: Before mounting the Camera, write down the Cameras Mac Address, Model Number, and location. These will come
in handy during setup or if troubleshooting is required.
A.
With the rear of the camera towards the rear of the plate, line up the pins on the plate with the holes in the camera
base.
Slide the camera towards the wall until it "Clicks" into position, and tighten the mounting plate screw.
B.
www.snapav.com Support: 866.838.5052
WPS-500-PTZ-IP Installation Manual
Rear of
Camera
Pg. 21