1- Safety Instructions - Wirepath Surveillance WPS-500-PTZ-IP Installation And User Manual

Ip ptz camera
Table of Contents

Advertisement

1- Safety Instructions

1.
Read and follow all instructions and warnings in this manual. Keep for future reference.
Install according to manufacturer's instructions.
2.
3.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
4.
Only use attachments/accessories specified by the manufacturer.
5.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as when the power-supply cord or plug is damaged, does not operate normally, or has been dropped.
6.
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK.
DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
www.snapav.com Support: 866.838.5052
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WPS-500-PTZ-IP Installation Manual
Pg. 3

Advertisement

Table of Contents
loading

Table of Contents