2-6-4 Setup Related to Display of GPS Data
GPS data display
To display the current location based on the GPS data in the
2
INFORMATION window on the viewfinder while recording or playing
back, you have to make the proper settings on the SET STATUS page of
the OPERATION menu.
Set the STATUS GPS item to ON.
Under this setting, when you push the CANCEL/PRST/ESCAPE switch
upward, the status confirmation window appears.
Each time you push the switch upward, the window changes. Repeat this
operation until the GPS confirmation window appears.
For details, see "Displaying the GPS INFORMATION window on the viewfinder"
on page 2-8.
2-24
Chapter 2 Using GPS Data (When Using an HKDW-704)