4
While ":" at the top of the current shutter is displayed, turn the
MENU knob until the desired number of frames appears.
If you turn the MENU knob clockwise or counterclockwise, the
number of frame changes in the following sequence: 1 y 2 y 3
y 4 y 5 y 6 y 7 y 8 y 16 y 32 y 64.
Note
4
Set the number of frames while the ":" at the top of the desired
number of frames is displayed. The number of frames displayed
when the ":" at the top disappears is selected.
Once the number of frames is selected, it is retained even when the
camcorder power is turned off.
Notes on using the SLS mode
• When the SLS mode is selected, the following items are limited in
functionality.
— AUTO IRIS
The iris setting is compulsorily set to OPEN. Adjust the iris setting
manually.
4-4
Chapter 4 Adding the SLS Mode to Shutter Modes (When Using an HKDW-705)
Lighting
The number of
frames changes.