2-6 Menu Setup
This section explains the menu setup required for recording or playback
of the GPS data received.
For detailed information on how to perform menu operations, refer to the
operation manual supplied with the camcorder.
Note
It is necessary to set a line number to output the GPS data to be recorded
on a tape.
For detailed information on how to set the line number, see "1-2-1 Confirming/
Setting the Line Number" on page 1-4.
2-6-1 Setup Related to Recording
The GPS SETUP page of the OPERATION menu allows you to make
settings for GPS recording, GPS tracing, the GPS tracing interval, time
zone, output formats and so on.
1
Follow the procedure of steps 1 to 3 described in "1-3 UMID Menu
Setup" on page 1-8 to display the GPS SETUP page of the
OPERATION menu.
The GPS SETUP page appears and the current settings are displayed
on the page.
Chapter 2 Using GPS Data (When Using an HKDW-704)
2
(Continued)
2-17