4-2 Setting the SLS Mode
Follow the procedure below to select the shutter speed in the SLS mode.
1
Set VF DISPLAY MODE to 2 or 3 on the VF DISP 1 page of the
OPERATION menu.
2
Push the SHUTTER selector from ON to SEL.
4
The current shutter setting appears for about 3 seconds in the setting
change and adjustment progress message display area of the
viewfinder screen.
Example: ":SS:1/250"
However, the ":" displayed at the top of the current shutter will
disappear within one second.
4-2
Chapter 4 Adding the SLS Mode to Shutter Modes (When Using an HKDW-705)
SHUTTER selector