Sony MSW-900 Supplemental Operation Manual page 118

Output from the REMOTE connector
The output format of data from the REMOTE connector depends on the
setting of the OUTPUT FORMAT item on the GPS SETUP page. This
2
setting does not affect the recording format. Set the output format
according to the map to be used for playback.
Setting
SONY
NMEA
a) For the output format, see "2-7-3 GPS Output Format of the REMOTE
Connector (8-pin)" on page 2-28.
Note
When you change the output format, turn the power of the camcorder off
after completing the settings once, and then turn the power on again.
Otherwise, this change does not take effect.
2-20
Chapter 2 Using GPS Data (When Using an HKDW-704)
Output
Outputs data for Navin'You.
Outputs GPGGA, GPVTG, and GPRMC in the NMEA-
0183 format.