Sony MSW-900 Supplemental Operation Manual page 139

3
Before the ":" disappears, push the SHUTTER selector to SEL again
and repeat this operation until ": SLS : **FRAME" appears.
"**" indicates the number of frames and one of the frame number
among 1 to 64 is displayed.
Pushing the SHUTTER selector to SEL repeatedly allows you to
cycle through the settings of mode and speed preselected on the SHT
ENABLE page of the OPERATION menu and shutter speeds in SLS
mode when an HKDW-705 option board is installed.
ECS mode
The above example is for the HDW-730 which
operates with the 59.94I format and the HDW-750.
For detailed information on the shutter speed, refer to
the manual supplied with the camcorder.
Chapter 4 Adding the SLS Mode to Shutter Modes (When Using an HKDW-705)
SS (standard) mode
SLS mode
4
(Continued)
4-3