3-2 Assigning the TELEFILE
Follow the procedure below to assign the TELEFILE MARK function to
the ASSIGN 1 switch.
3
1
Set the MENU ON/OFF switch to ON.
2
Turn the MENU knob until the FUNCTION 1 page appears, and
push the MENU knob.
The FUNCTION 1 page appears.
The current setting of an item appears to the right of that item.
3
Turn the MENU knob to move the t mark to ASSIGN 1, and push
the MENU knob.
The ASSIGN SW <1> window appears.
4
Assign the OK/NG/KP item to ASSIGN 1.
For detailed information on how to assign, refer to the "Assigning Functions to
ASSIGN 1/2 Switches" described in OPERATION MANUAL supplied with a
camcorder.
3-2
Chapter 3 Recording a Tele-File Mark
MARK Function to the
ASSIGN 1 Switch