Mounting The Tail Wheel Bracket - Black Horse Model Spitfire MK Instruction Manual Book

SPITFIRE MK
Item code: BH136
MOUNTING THE TAIL WHEEL
BRACKET.
     1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
Open
24
.
     2. Secure the tail wheel bracket in place
using three 3mm x 15mm wood screws. Be
careful not to overtighten the screws.
3x15mm
Instruction Manual
Secure
S e c u r e
3x10mm.
Bottom side.
3x15mm