SPITFIRE MK
Instruction Manual
.
Item code: BH136
INSTALLING THE ENGINE.
Throttle servo.
5x70mm
Throttle servo.
Throttle pushrod.
Secure.
Right side.
Front view.
INSTALLING THE THROTTLE PUSHROD.
1. Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
13