7.24.GPRS setting
User must send SMS via cell phone to set up APN,IP and port before starting GPRS
7.24.1Setting up APN
7.24.1.1 APN standards for Access Point Name and differs from country to country. For more
information about the local APN, inquire with your local GPRS network operator.
7.24.1.2 Text the tracker a SMS "APN+password + Space + your local APN" via a cell phone
and if succeeded in setup, the tracker will return the message "APN OK".
7.24.1.3 e.g. send SMS command "APN123456 CMNET". If succeeded, "APN OK" is returned
by the tracker in SMS.
Notes: 123456 refer to password of tracker and CMNET is the APN of China Mobile
(One of GSM Operator in china).
7.24.2 GPRS User ID and password Setup
7.24.2.1 In most countries, the user name and password involving GPRS login are not
compulsorily necessary, therefore, the entry can be skipped. For those countries
requiring user name and password, please configure as following:
7.24.2.2 Send SMS "up+password+space+user+space+password"If succeeded,
"user,password ok" is returned by the tracker in SMS.
For instance, send SMS "up123456 jonnes 666666" to the tracker, and if succeeded, the
tracker returns "user, password OK"
Note: 123456 is tracker device password, jonnes is the user name for GPRS login,
666666 is the password for GPRS login.
7.24.3 IP and port setup
7.24.3.1 Send SMS as below via a cell phone: adminip +password + Space + IP Address +
Space + Port Number. If succeeded, "adminip OK" is returned by the device in SMS.
7.24.3.2 e.g, Send SMS command "adminip123456 202.104.150.75 9000" to the tracker device,
If succeeded, "adminip OK" is returned by the device in SMS.( 123456 is default
password,202.104.150.75 is IP,9000 is port).
724.4 SWITCH TO GPRS MODE
7.24.4.1 The default mode is "SMS"
7.24.4.2 Send SMS "GPRS+password" to the unit, and it will reply "GPRS ok!" and switch to
"GPRS" mode.
7.24.4.3 Send SMS "SMS+password" to the unit, it will reply "SMS ok!" and restore to "SMS"
mode.
13
Need help?
Do you have a question about the GPS305 and is the answer not in the manual?