Reset By Sms; Sleep Mode; Check Imei; Set Up Terminal (Local) Time - Coban GPS107 User Manual

Gsm/gprs/gps vehicle tracker
Table of Contents

Advertisement

7.48 Reset by SMS

Send SMS "reset+password" to tracker device to reset the GSM module and GPS module of the tracker device, it
will reply "reset ok"

7.49 Sleep Mode

6.31.1 This function is deactivated as default, send "sleep+password+space+on", tracker will reply "sleep on ok".
When vehicle is not driving (ACC is OFF), GSM module fall asleep; GPS module shut off; and tracker works in
low power consumption. Calling, SMS command and any triggered alarm can awake it.
6.31.2 Cancel: Send "sleep+password+space+off", tracker will reply "sleep off ok", then tracker won't sleep,
GSM and GPS works all the time.

7.50 Check IMEI

Send SMS command "imei+password" to the unit. E.g. Send SMS command "imei123456" to the tracker device,
an IMEI number in 15 digits will reply to your cell phone.

7.51. Set up Terminal (local) Time

7.51.1 Send SMS command "time+space+zone+password+space+time" to the tracker unit, If succeed, It will reply
"time OK"
7.51.2 For example: Send SMS "time zone123456 8", 8 is Chinese time zone, If your country time zone is minus, send
SMS "time zone123456 -8".

7.52 TCP/UDP switch

Send command: "gprs+password,0,0" switch back to TCP mode, this is the default mode.
Second command:"gprs+password,1,1" switch to UDP mode.

7.53 Configure parameters by USB

Copy the Serial debugging tool (SSCOM.EXE) to computer, connect the tracker with computer and open serial
debugging tool with the USB cable (optional parts), then choose correct COM port, baud rate is 19200, send serial port
command (Tick "send new " on SSCOM interface): $SET GT PARA, tracker will return the sample format of the
command, send appropriate commands according to the sample format of command. Tracker will return "ok" after
succeeding in configuring to indicate successful configuration. For detailed operations, please check "COM PORT
COMMAND USER MANUAL"

7.54 GPRS Setting

User must send SMS via cell phone to set up APN, IP and port before starting tracking by GPRS

7.54.1 APN configuration

APN is short for Access Point Name and differs from country to country. For more information about your local APN,
please inquire with your local GPRS network operator.
7.54.1.1 APN settings of the first SIM card: (External SIM card is the first SIM card)
25

Advertisement

Table of Contents
loading

Table of Contents