Pacific energy BROADWAY GBWY.BODYA Installation And Operating Instructions Manual page 10

OWNER'S
INFORMATION
Comfort Fan Speed Control
If the appliance is equipped with a hot air circulating fan, the speed of the fan can be
controlled by the Proflame system. The fan speed can be adjusted through six (6) speeds.
To activate this function use the Mode Key (fig.1) to index the fan control icon (Fig. 10).
Use the Up/Down Arrow Keys (Fig.1) to turn on, off or adjust the fan speed (fig. 10). A
single "beep" will confirm reception of the command.
Figure 10: Fan Control
Continuous Pilot/Intermittent Pilot (CPI/IPI) selection
With the system in "OFF" position press the Mode Key (fig. 1) to index to the CPI mode
icon (fig.11).
Pressing the Up Arrow Key will activate the Continuous Pilot Ignition mode (CPI). Pressing
the Down Arrow Key will return to IPI. A single "beep" will confirm the reception of the
command.
Figure 11: CPI/IPI Selection
10