Detect; Pan/Tilt/Zoom - ClearView Hawk04-HD User Manual

Important:
When you are setting the router external port, please use 1024~5000 port. Do not use
well-known port 1~255 and the system port 256~1023 to avoid conflict.
For the TCP and UDP, please make sure the internal port and external port are the same
to guarantee the proper data transmission.
5.3.4.10 Alarm Centre
This interface is reserved for you to develop.

5.3.5 Detect

Please refer to chapter 4.5 Detect.

5.3.6 Pan/Tilt/Zoom

The pan/tilt/zoom setup includes the following items. Please select channel first. See Figure 5-23.
•
Protocol: Select corresponding PTZ protocol such as PELCOD.
•
Address: input corresponding PTZ address.
•
Baud rate: Select baud rate.
Figure 5-21
Figure 5-22