Schedule; Network - ClearView Hawk04-HD User Manual

5.3.3 Schedule

Please refer to chapter 4.4 schedule.

5.3.4 Network

Here is for you to input network information. See Figure 5-8.
•
IP address: Here you can input IP address.
•
DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet
mask /Gateway. These values are from DHCP function. If you have not enabled DHCP
function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to
view current IP information. Besides, when PPPoE is operating, you can not modify
IP/Subnet mask /Gateway.
•
TCP port: Default value is 37777. You can change if necessary.
•
UDP port: Default value is 37778. You can change if necessary.
•
HTTP port: Default value is 80.
•
RTSP port: Default value is 554.
•
Max connection: system support maximal 20 users. 0 means there is no connection limit.
•
Preferred DNS: DNS IP address.
•
Alternative DNS: DNS alternative IP address.
•
Transfer mode: Here you can select the priority between fluency/video qualities.
Figure 5-6
Figure 5-7