Kyocera KM-3035 Operation Manual page 80

Section 6 COPIER MANAGEMENT FUNCTIONS
Output limitation
Perform the following procedure when you want to set the maximum
number of copies and printouts that can be made under the
corresponding department ID-code. If the optional Printer Kit or
Printer/Scanner Kit is installed in your copier, this limit will apply to the
number of copies AND printouts that can be made in total.
NOTE
This setting will not be available when "Is not permitted" is selected for
both the "Copying privileges ON/OFF" and the "Printing privileges ON/
OFF" settings, or when "Is not permitted" is selected as the "Copying
privileges ON/OFF" setting and the optional Printer Kit or Printer/
Scanner Kit is NOT installed in your copier.
1 Access the screen that contains the copy restriction setting
items.
(See "Register new department ID-codes" on page 6-4 or
"Change restrictions for use" on page 6-20.)
Inch specifications
Management edit
Department
01 1st Sales Dept.
02 2nd Sales Dept.
0001 3rd Sales Dept.
0014 4th Sales Dept.
00000015 5th Sales Dept.
00000016 6th Sales Dept.
00000017 7th Sales Dept.
Default setting - Management
Metric specifications
Management edit
Department
01 1st Sales Dept.
02 2nd Sales Dept.
0001 3rd Sales Dept.
0014 4th Sales Dept.
00000015 5th Sales Dept.
00000016 6th Sales Dept.
00000017 7th Sales Dept.
Default setting - Management
6-10
Close
Order of
Up
indication
Mgt. Inf. Limit
correction in use
Delete
Down
Register
001/010
Close
Order of
Up
indication
Mgt. Inf. Limit
correction in use
Delete
Down
Register
001/010
2 Select "Output limitation" under the "Setting item" column on
the left side of the touch panel and then touch the "Change #"
key.
The "Output limitation" screen will be displayed.
Inch specifications
Limit in use
0007 1st Sales Dept.
Setting item
Copy limitation
Printer limitation
Output limitation
Scanner limitation
Fax Transm. Limitation
Default setting - Management - Management edit
Metric specifications
Limit in use
1st Sales Dept.
0007
Setting item
Copy limitation
Printer limitation
Output limitation
Scanner limitation
Fax Transm. Limitation
Default setting - Management - Management edit
3 To set the maximum limit for copying and printing under this
ID-code, touch the "Counter limit" key and proceed to the
next step.
To allow unlimited copying and printing, touch the "No limit"
key and then proceed to step 5.
Inch specifications
Output limitation
No limit
Counter
limit
Management - Management edit - New register
Metric specifications
Output limitation
No limit
Counter
limit
Management - Management edit - New register
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
Value
On
On
No limit
No limit
No limit
Change #
Value
On
On
No limit
No limit
No limit
Change #
Back
Back
Close
Close
Close
Close