Kyocera KM-3035 Operation Manual page 100

Section 6 COPIER MANAGEMENT FUNCTIONS
● Copy/Printer output management
Perform the following procedure to determine whether management of
copier and printer functions will be handled together or separately.
NOTE
If this setting is changed, it will affect which setting items are available
for restriction under the copy management function. (See "Setting the
restrictions for use" on page 6-7.)
1 Select "Copy/Printer output mgt." under the "Setting item"
column on the left side of the touch panel and then touch the
"Change #" key.
The "Copy/Printer output mgt." screen will be displayed.
Inch specifications
Managem. Def. Set.
Setting item
Copy management
Print. Managem.
Printer error report
Others Mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Managem.
Fax Management
Default setting - Management - Managem. Def set.
Metric specifications
Managem. Def. Set.
Setting item
Copy management
Print. managem.
Printer error report
Others mgt. Reg. (print)
Copy/Printer output mgt.
Scanner Managem.
Fax Management
Default setting - Management - Managem. Def set.
6-30
Value
On
On
On
On
All
On Change #
On
Value
On
On
On
On
All
On Change #
On
2 To have copier and printer functions both handled together,
touch the "All" key. To have copier and printer functions each
handled separately, touch the "Each" key.
Inch specifications
Copy/Printer output mgt.
Copy/Printer output management method setting.
Default setting - Management - Managem. Def set.
Metric specifications
Copy/Printer output mgt.
Copy/Printer output management method setting.
Close
Default setting - Management - Managem. Def set.
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 1.
Close
3
Touch the "Close" key.
The touch panel will return to the screen in step 1.
Back
All
Each
Back
All
Each
Close
Close