Phoenix Model Spitfire Instruction Manual page 7

Retract and the gear is opened.
Retract and the gear is closed.
10.Secure the wing to the fuselage using the
plastic screws.
Cowl
(head)
INSTALLING THE HORIZONTAL STABILIZER
1. Using a modeling knife, cut away the covering
from the fuselage for the stabilizer and remove
it.
2. Remove the covering from the stabilizer.
When cutting through the covering to remove it,
cut with only enough pressure to only cut
through the covering it's self. Cutting into the
balsa structure may weaken it. This could lead
to possible failure during flight.
Cowl
(head)
3. Test the position of the elevator and adjust it as
shown.
6
Plastic screw
20
21
22