Checking For Gps Signal; Navigation; Setting The Measurement Unit - Metres Or Yards; Registration - MGI Navigator G800 Instruction And Service Manual

Table of Contents

Advertisement

25. Checking for GPS Signal

Before checking the status of your GPS signal, ensure you have clear sky above your buggy and
the Navigator G800 unit has been on for at least five minutes.
You can check the status of GPS reception by going to:
Sureshot Homepage > Features > Status > GPS Information > GPS Signal
It will display the satellite number and signal strength for each satellite. A blue bar indicates that
the satellite is being used in the position calculation. A red bar indicates that the satellite signal
is being received but it is not used in the position calculation. The latitude and longitude of the
current position is also displayed.
The GPS signal strength is also displayed via a five column bar graph on the main menu page.
Once again, a blue bar indicates that the satellite is being used in the position calculation. A red
bar indicates that the satellite signal is being received but it is not used in the position calculation.

26. Navigation

Displays velocity, heading and odometer.
Sureshot Homepage > Features > Status > GPS Information > Navigator
27. Setting the measurement unit – metres or yards
Go to Sureshot Homepage > Features > Setup > Metres/Yards
Choose Metres or Yards. Press the Menu Key to go to the main menu

28. Registration

Go to Sureshot Homepage > Features > Status > Registration
Displays the software version, unique electronic serial number, registration date, model and owner
details.

29. Reset Unit

Go to Sureshot Homepage > Features > Status > Reset Unit
This enables you to reset your Navigator G800 to the factory settings. It will delete all loaded
courses, saved games and reset features to their default values. It does not reset the registration
details.

30. Competition Mode

You can enable Competition Mode which disables the GPS signal, the Play Golf functions and it
does not display any distances under Buggy Mode.
Go to Sureshot Homepage > Features > Buggy/Remote > Competition Mode

31. Pair Remote

Go to Sureshot Homepage > Features > Buggy/Remote > Synchronise
16

Advertisement

Table of Contents
loading

Table of Contents